Brocade Virtual ADX Switch and Router Guide (Supporting ADX v03.1.00) - Manual (Page 32)

18 Brocade Virtual ADX Switch and Router Guide
53-1003246-01
Configuring system parameter settings
1
The num varaible specifies the maximum number for the system parameter. The minimum,
maximum and default values for a system parameter are determined by the license that is active
on your system. For actual values associated with your license, refer to the Brocade Virtual ADX
Licensing Guide.
To display the system parameters, and their defaults and maximum values, enter the show default
values command at any level of the CLI.
Virtual ADX(config)#show default values