Agilent Technologies E5810A User Manual
Page 103
Chapter 3
103
Using E5810A Web Access
Other Web Access Functions
7
Configure FTP Parameters and Filename.
Enter the following information
in the dialog box:
a
Firmware FTP Server Hostname or IP Address:
Enter the IP address
of the FTP Server (e.g., 192.6.143.21) OR enter the FTP Server
domain name, if a DNS Server is available and configured in the
E5810 (e.g., ftp.agilent.com)
b
User Login:
Enter the Login name for the FTP Server (same as
Step 3) (e.g., anonymous)
c
Password: Enter
the password associated with the login name
(same as Step 3).
d
Firmware File:
Enter the
filename of the E5810 firmware (default is
e5810/e5810_latest_firmware.hex
). You may also need to
add the appropriate directory information to locate the file on the
FTP Server.
8
Perform Firmware Update.
a
Click
the
Update Firmware
button to display a password dialog box.
Click
OK
to confirm the update and the E5810 will attempt to
download the firmware from the FTP Server specified.
b
The E5810 front panel should display the message “
Updating
firmware…
”