Agilent Technologies E5810A - Manual (Page 29)

Chapter 1 29
E5810A Description
E5810A Software/Firmware
Communicating with the E5810A
There are two ways you can communicate with the E5810 via a network: use
the E5810 Web access or use a supported programming language with the
Agilent IO Libraries Suite.
Using the E5810 Web Access
Agilent IO Libraries Are Not Required
LAN PC E5810 Instruments
Use a supported Web
Browser to access and
configure the E5810. The E5810 provides a
Web Server that allows
for access via the Web. Instruments are programmed
using standard instrument
commands (such as SCPI)
via the Web browser.
Using Supported Programming Languages
Agilent IO Libraries Are Required
LAN PC E5810 Instruments
To program connected
instruments, you must
install and configure the
Agilent IO Libraries Suite
on your PC. The interface must be
configured for VISA
LAN Client operation. Program instruments
using a supported
programming language
(such as C, etc.) and
VISA or SICL.
GPIB
GPIB