Agilent Technologies E5810A - Manual (Page 75)

Chapter 3 75
Using E5810A Web Access
Opening Your Web Browser for E5810A Web Access
Opening Your Web Browser for E5810A Web
Access
Since the E5810 is Web-enabled, you can access and communicate with the
E5810 using your Web browser (Internet Explorer 6.0 or greater).
To display the E5810 Welcome page, open your Web browser and type
http://<E5810 IP Address>
or http://<E5810 Hostname>
on the address line, where <E5810 IP Address> is the IP address of the
E5810 and <E5810 hostname> is the Hostname of the E5810 (if known).
Then, press the
Enter key .
For example, assume the E5810 IP Address is 169.254.58.10 (the default
static IP address). Typing http://169.254.58.10 and pressing
Enter
displays the E5810 Welcome page. A typical Welcome page display (with a
non-default IP address shown) follows. The Welcome page is the home
page. The banner and the Navigation Bar (Welcome Page, etc.) are a fixed
frame for each page. The text within each page scrolls (as necessary) to
display desired information.