Agilent Technologies E5810A - Manual (Page 20)

20 Chapter 1
E5810A Description
E5810 Hardware Description
Depress and Hold the Preset Button (>10 Seconds)**
Hostname
IP Address
Temporary Pass-
word = "E5810"
Hostname
IP Address
Hold to Reboot
& Set Defaults
Setting Factory
Defaults
Rebooting
E5810...
Depress and Quickly (<10 seconds) Release the Preset Button *
- The E5810 password is temporarily reset to its factory default (E5810).
- All other configuration parameters remain unchanged.
- This state is maintained until the next time the E5810 is booted.
- The front panel display sequence is as follows.
* Release the Preset button when Temporary Password = "E5810" is displayed.
Hostname
IP Address
Temporary Pass-
word = "E5810"
- All configuration parameters are set to their default values.
- The E5810 is rebooted.
- The front panel display sequence is as follows.
** Release the Preset button when Rebooting E5810... is displayed.