Agilent Technologies E5810A - Manual (Page 97)

Chapter 3 97
Using E5810A Web Access
Other Web Access Functions
Other Web Access Functions
This section describes four other E5810A Web Access functions:
„ Determining Session Status
„ Using Web Help
„ Updating E5810A Firmware
Determining Session Status
To open the E5810 LAN/GPIB Gateway Status page, click the Session Status
icon on the Navigation Bar. A typical display follows. Click the Refresh button
to update the display to the current configuration.
Firmware Revision
Displays the current E5810 firmware revision.
See "Updating E5810 Firmware" for steps to
update to the latest firmware version.
LAN Speed at Reboot
Displays the LAN speed at the time the
E5810 was last rebooted.
Time since Reboot
Displays the time since the last reboot of
the E5810.
Connection Status
Displays the current status of all open
sessions for the E5810, including the Client
IP Address, Session Number, Device/
Instrument Operation (READ, etc.), Lock
Status, and Device/Interface name (such
as gpib0, etc.)
When a device is locked, the device name
(such as DEV) appears in the Lock column.
In this case, this device cannot be used by
anyone other than the user who set the lock.