Agilent Technologies E5810A - Manual (Page 17)

Chapter 1 17
E5810A Description
E5810 Hardware Description
Front Panel Features
This section describes the E5810 front panel features,
Front Panel
Display/LEDs
This figure shows E5810 front panel functions.
NOTE
The Hostname, if detected, is displayed on the first line of the E5810 front
panel display. The IP Address of the E5810 is displayed on the second
line of the E5810 front panel display.
Activity
LAN GPIB RS232
Power Fault
Preset
E5810A
LAN/GPIB Gateway
agiltb6
169.254.58.10
Display
A 16-character, two-line display
that displays the Hostname (if
known) and the IP Address plus
system messages.
Power LED
When ON (Green), shows AC
power is applied to the E5810.
LAN LED
Flashes for activity on the LAN.
GPIB LED
Flashes for GPIB instrument activity.
Fault LED
If ON (RED) for >10 sec,
indicates possible hardware
failure. Briefly turns ON at
power-on while the E5810
is running its self-test.
Preset Button
Depressing for <10 sec temporarily resets only
the default password (E5810). Depressing for
>10 sec resets all parameters to factory default
values and reboots the E5810.
RS232 LED
Flashes for RS-232 instrument activity.