Agilent Technologies E5810A User Manual
Page 91
Chapter 3
91
Using E5810A Web Access
Viewing and Modifying Configuration
Universal Plug &
Play (UPnP)
[ON]
If Universal Plug & Play (UPnP) is enabled, a multicast message is
generated and sent about once an hour to the subnet. Enterprise
(corporate) networks will want to decide whether this additional traffic is
acceptable. By default, UPnP is NOT enabled on Windows XP. Check
your Operating System instructions to enable UPnP. Universal Plug and
Play (UPnP) has two options: ON or OFF.
Option ON:
The E5810 is configured as a UPnP device and
provides information to the network about itself via an XML
description when mounted to the network.
Option OFF:
The E5810 is not UPnP capable and will not announce
its presence as a UPnP device when mounted to the network.
Parameter
[Default]
Description