Agilent Technologies E5810A - Manual (Page 92)

92 Chapter 3
Using E5810A Web Access
Finding and Querying Instruments
Finding and Querying Instruments
This section shows how to find and query GPIB and/or RS-232 instruments
connected to your E5810 by using the
Find and Control Instruments
Connected to your E5810 page. This page is password-protected since you
can inadvertently interfere with running VISA/SICL applications if you query
an instrument at an inappropriate time.
This page allows you to quickly communicate with your GPIB and RS-232
instruments and can help you determine if the instrument side of the E5810
is working properly. You can also use this page to set up and take
measurements remotely by sending instrument commands.
Click Device Clear, *IDN?,
Read STB, or SYST:ERR? Set instrument timeout
value in seconds Clear the
history display Highlight to select
an instrument
Click the Find button to display
connected instruments. The first
time this page is opened, no
instruments are displayed. Enter command on
Instrument Command line
and then click Send,
Receive, or Query
(sends and receives) Clear all pending operations
and expire all existing timeouts
on instruments connected to
the E5810.
History
Display