Agilent Technologies E5810A - Manual (Page 30)

30 Chapter 1
E5810A Description
E5810A Software/Firmware
Using E5810 Web
Access
Since the E5810 is Web-enabled, you can communicate with the E5810
from a supported Web browser. The E5810 supports Internet Explorer 6.0 or
greater. Typing in the E5810 IP address (or E5810 hostname, if known) on
your Web browser address line and then pressing the
Enter key displays the
E5810 Welcome page.
You can use the Web access to configure the E5810 and to communicate
with GPIB and/or RS-232 instruments. For example, using the
Configuring
your E5810 LAN/GPIB Gateway page of the E5810 interface, you can view
and modify the configuration of the E5810. Or, you can communicate with
installed GPIB and/or RS-232 instruments using the
Find and Control
Instruments Connected to your E5810 page of the interface. See Chapter 3 ,
“Using E5810A Web Access” for information on E5810 Web access.