Brother MFC-795CW - Manual (Page 133)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
117
13
How to scan to a memory card
or USB Flash memory drive
13
You can scan black & white and color
documents into a memory card or USB Flash
memory drive. Black & white documents will
be stored in PDF (*.PDF) or TIFF (*.TIF) file
formats. Color documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats.
The factory setting is Color 150 dpi and
the default file format is PDF. The machine
automatically creates file names based on
the current date. (For details, see the Quick
Setup Guide.) For example, the fifth image
scanned on July 1, 2009 would be named
07010905.PDF. You can change the color
and quality.
a
Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while
Photo Capture is blinking to avoid
damaging the card, USB Flash memory
drive or data stored on them.
b
Load your document.
c
Press (Scan).
d
Press Scan to Media.
e
Do one of the following:
„ To change the quality, press d or c to
display Quality.
Press Quality and choose
Color 150 dpi,
Color 300 dpi,
Color 600 dpi,
B/W 200x100 dpi or
B/W 200 dpi.
„ To change the file type, press d or c
to display File Type.
Press File Type and choose PDF,
JPEG or TIFF.
„ If you want to change the file name,
press d or c to display File Name.
Press File Name and enter the file
name.
You can only change the first
6 characters.
Press OK.
„ Press Black Start or Color Start to
start scanning without changing
additional settings.
Note
• If you chose color in the resolution setting,
you cannot choose TIFF.
• If you chose black & white in the resolution
setting, you cannot choose JPEG.
f
Press Black Start or Color Start.
Quality Selectable File
Format
Color 150 dpi JPEG / PDF
Color 300 dpi JPEG / PDF
Color 600 dpi JPEG / PDF
B/W 200x100 dpi TIFF / PDF
B/W 200 dpi TIFF / PDF