Brother MFC-795CW - Manual (Page 171)

Troubleshooting and Routine Maintenance
155
B
Paper Jam Paper is jammed in the machine. Open the Jam Clear Cover (at the back of
the machine) and pull out the jammed
paper by following steps in Printer jam or
paper jam on page 160.
Make sure the paper length guide is fit to
the paper size. Do not extend the paper
tray when you load A5 or smaller size
paper.
Touchscreen
initialization
failed The Touchscreen was pressed
before the power on initialization
was completed. Make sure that there is nothing resting on
or touching the Touchscreen.
Unable to Clean XX
Unable to Init. XX
Unable to Print XX
Unable to Scan XX
(If the LCD shows
error number 46,
see the error message
Unable to Clean 46
Unable to Init. 46
Unable to Print 46
in this table.)
The machine has a mechanical
problem.
—OR—
A foreign object such as a paper
clip or ripped paper is in the
machine.
Open the scanner cover and remove any
foreign objects and paper scraps from
inside the machine. If the error message
continues, see Transferring your faxes or
Fax Journal report on page 157 before
disconnecting the machine so you will not
lose any important messages. Then,
disconnect the machine from the power for
several minutes and reconnect it.
Error Message Cause Action