Brother MFC-795CW - Manual (Page 66)

Chapter 6
50
g
Press Memory Receive.
h
Press Paging.
i
Enter your cell phone or pager phone
number. For pager numbers enter ##
after the number. (You can enter up to
20 digits including the ##.)
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #.
j
Do one of the following:
„ If you are programming your cell
phone number and do not need to
enter a PIN, press OK.
„ If your pager needs a PIN, enter the
PIN, press #, press Pause, and then
enter your fax number followed by
# # using the buttons on the LCD.
Press OK.
For example, press:
1 2 3 4 5 # Pause 1 8 0 0 5 5 5 6 7 8
9 # #
„ If you do not need a PIN, press
Pause, and then enter your fax
number followed by # # using the
buttons on the LCD.
Press OK.
For example, press:
Pause 1 8 0 0 5 5 5 6 7 8 9 # #
k
Press Stop/Exit.
Note
• You cannot change a paging number or
PIN remotely.
• Paging does not work when you receive a
color fax.
• If you want to be paged for voice
messages, make sure you pressed the
Message Center button on the control
panel to turn the Message Center on.
Fax Storage
6
If you choose Fax Storage, your machine
stores the received fax in the memory. You
will be able to retrieve fax messages from
another location using the remote retrieval
commands.
If you have set Fax Storage, a backup copy
will automatically be printed at the machine.
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display
Memory Receive.
g
Press Memory Receive.
h
Press Fax Storage.
i
Press Stop/Exit.
Note
Color faxes cannot be stored in the
memory. When you receive a color fax
your machine prints the color fax at your
machine.