Brother MFC-795CW - Manual (Page 30)

Chapter 2
14
If you have problems when printing on
envelopes with the flap on the short edge,
try the following:
2
a
Open the envelope flap.
b
Put the envelope into the paper tray with
the address side down and the flap
positioned as shown in the illustration.
c
Adjust the size and margin in your
application.
Loading photo paper
2
Note
In Canada, the photo bypass tray is
called the photo paper tray.
Use the photo bypass tray, which is located
on the top of the output paper tray cover, to
print on Photo (4"
× 6") and Photo L
(3.5" × 5") size paper. When you use the
photo bypass tray, you do not have to take
out the paper that is in the tray beneath it. You
can load maximum of 20 photo cards in the
tray. (For the maximum number of photo
cards you can load, see Paper weight,
thickness and capacity on page 20.)
a
Squeeze the blue photo bypass tray
release button (1) using your right index
finger and thumb and push the photo
bypass tray forward until it clicks into the
photo printing position (2).
b
Press and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
c
Put the photo paper into the photo
bypass tray and gently adjust the paper
side guides to the paper.
Make sure the paper side guides touch
the sides of the paper. Check that the
paper is flat in the tray.
Photo Bypass Tray
2
1
2
1