HP Latex 3000 Printer - Manual (Page 108)

3. Remove its packaging and protective caps.
TIP: You may wish to keep the protective caps for later reuse, in case you ever want to remove a
printhead from the printer.
4. Put the new printhead into its correct place in the printer, and lower its handle.
CAUTION: Insert the printhead slowly, without hitting any parts of the carriage. It may be damaged if
you insert it too fast, or if you hit something.
5. Lower the latch until it lies on the printhead but do not close it yet.
102 Chapter 5 Handle the ink system ENWW