HP Latex 3000 Printer - Manual (Page 206)

Clean the rear scan-axis beam
Risk of burns Crush hazard Risk of trapped
fingers
Hazardous moving
part
Light radiation hazard Electric shock hazard
For more safety information, see Safety precautions on page 2
Prepare to clean the rear scan-axis beam
1. Ensure that you have a vacuum cleaner and an absorbent all-purpose cloth (not provided).
2. Ensure that the printer is not printing.
3. Ensure that all windows, covers, and doors are closed and remain in their original position.
4. Move the carriage to its leftmost position.
5. Turn off the printer in the correct way for maintenance operations: see Turn the printer off on page 142 .
Clean the rear scan-axis beam
1. Open the service position window.
200 Chapter 8 Hardware maintenance ENWW