Replace a service station cap – HP Latex 3000 Printer User Manual
Page 232
Finish off after replacing a curing fan and resistor module
1.
Close the front door.
2.
Turn on the printer in the correct way for maintenance operations: see
Turn the printer on on page 143
.
Replace a service station cap
Risk of burns
Crush hazard
Risk of trapped
fingers
Hazardous moving
part
Light radiation hazard
Electric shock hazard
For more safety information, see
Prepare to replace a service station cap
1.
Ensure that you have the Service Station Caps Kit (CZ056-67036), which is included in the Standard
Uptime Kit (D4J02A).
2.
Ensure that the printer is not printing.
3.
Ensure that all windows, covers, and doors are closed and remain in their original position.
4.
Move the carriage to the service position.
5.
Turn off the printer in the correct way for maintenance operations: see
Turn the printer off on page 142
.
Replace a service station cap
1.
Unscrew and remove the cover as shown below, to access the capping station.
226 Chapter 8 Hardware maintenance
ENWW