HP Latex 3000 Printer User Manual
Page 94
The number of copies are automatically distributed according to the parameters defined in
(number of rows, column, centered). .
●
At the end of each row a black registration line is printed automatically (a). This registration line is
used while printing side B, to position the side B rows and minimize the registration errors.
●
It is recommended to mark with a marker the back side of the last registration line (b) to position
the substrate during the side B loading process.
●
When side A has been printed, after the last continuous black registration line, the printer
automatically provides an area in which to perform the side B calibration (c) and side B loading (d)
area.
NOTE:
The area dedicated to calibration, between the continuous registration line and the dotted line
(c), must be advanced at the same speed as the printed area, and at the same temperature, to ensure an
effective calibration.
4.
When Side A has finished printing, unload side A. See
.
5.
Check that the substrate-advance sensor is clean, and do not hesitate to clean it. See
substrate-advance sensor on page 202
88
Chapter 4 Create and manage print jobs
ENWW