HP Latex 3000 Printer User Manual
Page 177
Advertising
8.
Check again that the new wicks are inserted correctly.
9.
Tighten the screws.
10.
Insert the new foam.
11.
Slide in the cover.
12.
Close the service position window.
Finish off replacing the oiler foams
1.
Ensure that all windows, covers, and doors are closed and remain in their original position.
2.
Turn on the printer in the correct way for maintenance operations: see
Turn the printer on on page 143
ENWW
Clean the carriage rails and replace the oiler foams 171
Advertising