HP Latex 3000 Printer - Manual (Page 257)

Diverter interwheels
1. Wipe the diverter interwheels with a lint-free cloth dampened with isopropyl alcohol, and make sure
that the platen is dry before printing.
NOTE: If you are in an area (such as California) that regulates VOC cleaning and maintenance fluids,
instead of isopropyl alcohol use a VOC-certified cleaner such as a properly diluted Simple Green All-
Purpose Cleaner.
2. Close the curing module and the front door.
Replace the ink collector foams
TIP: Do this away from the printer to avoid ink dripping on the printer.
1. Slide out the dirty old foams.
NOTE: Consult your local authorities to determine the correct manner in which to dispose of them.
ENWW Replace the ink collector foams 251