HP Integrated Lights-Out 4 User Manual
Page 105
2.
Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
3.
Restart or power on the server.
4.
Press F9 in the HP ProLiant POST screen.
The System Configuration screen appears.
5.
Use the up or down arrow keys and the Enter key to navigate to the System Configuration
→iLO
4 Configuration Utility
→Network Options screen.
6.
Select Network Interface Adapter, and then press Enter.
The Network Interface Adapter options appear, as shown in
.
Figure 47 Selecting the Network Interface Adapter
7.
Select ON, and then press Enter.
8.
Press F10 to save the changes.
The iLO 4 Configuration Utility prompts you to confirm that you want to save all pending
configuration changes.
9.
Press Enter.
The iLO 4 Configuration Utility notifies you that iLO must be reset in order for the changes to
take effect.
After iLO resets, the Shared Network Port feature is active. Any network traffic going to or
originating from iLO is directed through the Shared Network Port.
10. Press Enter.
iLO resets, and the remote console session is automatically ended. You can reconnect in
approximately 30 seconds.
Configuring and using the iLO Shared Network Port 105