HP Integrated Lights-Out 4 - Manual (Page 110)

Figure 48 iLO Management – SNMP Settings page
3. Select the SNMP setting:
•
Agentless Management (default)—Use SNMP agents running on iLO to manage the server.
SNMP requests sent by the client to iLO over the network are fulfilled by iLO. This setting
does not affect alerts.
•
SNMP Pass-thru—Use SNMP agents running on the host operating system to manage the
server. SNMP requests sent by the client to iLO over the network are passed to the host
operating system. The responses are then passed to iLO and returned to the client over
the network. This setting does not affect alerts.
4. Enter the following information:
•
System Location (Agentless Management only)—A string of up to 49 characters that
specifies the physical location of the server.
•
System Contact (Agentless Management only)—A string of up to 49 characters that
specifies the system administrator or server owner. The string can include a name, email
address, or phone number.
•
System Role (Agentless Management only)—A string of up to 64 characters that describes
the server role or function.
•
System Role Detail (Agentless Management only)—A string of up to 512 characters that
describes specific tasks that the server might perform.
•
Read Community (Agentless Management only)—The configured SNMP read-only
community string.
Read Community supports the following formats:
◦ A community string (for example, public).
◦ A community string followed by an IP address or FQDN (for example, public
192.168.0.1
).
Use this option to specify that SNMP access will be allowed from the specified IP
address or FQDN. For iLO 4 1.10 or later, you can enter an IPv4 address or FQDN.
•
Trap Community—The configured SNMP trap community string.
110 Configuring iLO