HP Integrated Lights-Out 4 User Manual
Page 23
Advertising
Figure 5 iLO 4 Configuration Utility Network Configuration
5.
Disable DHCP:
a.
Select DHCP Enable, and then press Enter.
b.
Select OFF, and then press Enter.
6.
Enter an IP address, subnet mask, and gateway IP address:
a.
Select IP Address, and then press Enter.
b.
Type the IP address, and then press Enter.
c.
Select Subnet Mask, and then press Enter.
d.
Type the subnet mask address, and then press Enter.
e.
Select Gateway IP Address, and then press Enter.
f.
Type the gateway IP address, and then press Enter.
7.
Press F10 to save the changes.
The iLO 4 Configuration Utility prompts you to confirm that you want to save all pending
configuration changes, as shown in
.
Setting up iLO by using iLO RBSU or the iLO 4 Configuration Utility
23
Advertising