HP Color LaserJet CM6030CM6040 Multifunction Printer series - Manual (Page 119)

Load paper and print media
You can load different media in the trays and then request media by type or size by using the control
panel.
Load Tray 1
CAUTION: To avoid jams, never add or remove paper from Tray 1 during printing.
1. Open Tray 1.
2. Set the side guides to the correct width, and pull out the tray extensions to support paper.
3. Load paper in the tray with the side to be printed on face down and the top of the paper or non-
postage end facing the back of the printer.
NOTE: For Letter Rotated and A4 Rotated sizes, place the side to be printed on face down, with
the bottom of the page facing into the printer.
4. Make sure the stack fits under the tabs on the guides and does not exceed the load-level indicators.
5. Adjust the side guides so that they lightly touch the paper stack but do not bend it.
ENWW Load paper and print media 103