Declaration of conformity, Enww declaration of conformity 301 – HP Color LaserJet CM6030CM6040 Multifunction Printer series User Manual
Page 317
Declaration of Conformity
Declaration of Conformity
according to ISO/IEC 17050–1 and EN 17050–1
Manufacturer's Name:
Hewlett-Packard Company
DoC#: BOISB-0601–01–rel.2.0
Manufacturer's Address:
11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares that the product
Product Name:
HP Color LaserJet CM6030, CM6040 MFP series
Accessories
CB473A – 1x500-sheet input tray/stand
CB474A – 3x500-sheet input tray/stand
CC516A – Booklet Maker
CC517A - 3-Bin Stapler/Stacker
Regulatory Model Number:
2)
BOISB-0601-01
Product Options:
ALL
Toner Cartridges/Drums: CB390A, CB381A, CB382A, CB383A, CB384A, CB385A, CB386A,
CB387A
conforms to the following Product Specifications:
Safety:
IEC 60950-1:2001 / EN60950-1: 2001 + A11
IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994 A1 +A2 (Class 1 Laser/LED Product)
GB4943-2001
EMC:
CISPR 22:2005 / EN 55022:2006 – Class A
1)
EN 61000-3-2:2000 +A2
EN 61000-3-3:1995 + A1
EN 55024:1998+A1 + A2
FCC Title 47 CFR, Part 15 Class A / ICES-003, Issue 4
GB9254-1998, GB17625.1–2003
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC, and
carries the CE-Marking accordingly.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name
or the product number(s).
Boise, Idaho , USA
February 1, 2008
For regulatory topics only:
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards
Europe, Herrenberger Straße 140, D-71034 Böblingen, Germany, (FAX: +49-7031-14-3143)
USA Contact:
Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015, USA,
(Phone: 208-396-6000)
ENWW
Declaration of Conformity 301