HP Color LaserJet CM6030CM6040 Multifunction Printer series - Manual (Page 137)

Configure the accessory operation mode
Select the operating mode at the control panel
You can set the operating mode for the stapler/stacker or the booklet maker at the product control panel.
1. At the control panel, touch Administration , and then touch Device behavior .
2. Touch MBM-3 bin stapler or Multifunction finisher .
3. Touch Operation mode , and then select the operation mode that you want to use.
● When Mailbox Mode is used, each bin is assigned to a user or group of users. Every time a
user sends a print job, the job is routed to the assigned bin.
● When Stacker Mode is used and the optional 3-bin stapler/stacker is installed, the three bins
act as a single bigger bin. When one bin gets full, jobs are automatically routed to the next
bin. When Stacker Mode is used and the booklet maker finisher is installed, the two upper
bins act as a single bin, and the third bin is reserved for booklets.
● When Function Separator (3-bin stapler/stacker only) mode is used, each bin is assigned to
a specific kind of job. Usually this designation is bin 1 for copies, bin 2 for fax, and bin 3 for
printing. These values can be modified in the Default Job Options menus for copy, fax, and
print.
NOTE: Use the product embedded Web server to assign output bins to users or groups of users.
For more information see Embedded Web server on page 183 .
Select the operating mode in the printer driver
1. Click the Start button, point to Settings, and then click Printers (for Windows 2000) or Printers
and Faxes (for Windows XP).
From your Vista computer click Start, click Control Panel, and then in the category for Hardware
and Sound click Printer.
2. Right-click the HP product icon, and then click Properties or Printing Preferences.
3. Click the Device Settings tab.
4. Perform one of the following actions:
For automatic configuration: under Installable Options, click Update Now in the Automatic
Configuration list.
-or-
For manual configuration: under Installable Options, select the appropriate operation mode in the
Accessory Output Bin list.
5. Click Apply to save the settings.
Select the operating mode in the printer driver (Mac OS X)
1. In the Apple menu, click System Preferences.
2. In the System Preferences box, click Print and Fax.
3. Click Set Up Printers. A Printer List displays.
ENWW Choose an output location 121