HP Color LaserJet CM6030CM6040 Multifunction Printer series - Manual (Page 158)

Set document effects
To perform the following tasks, open the printer driver and click the Effects tab.
How do I Steps to perform
Scale a page to fit on a selected paper size Click Print document on, and then select a size from the drop-
down list.
Scale a page to be a percent of the actual size Click % of actual size, and then type the percent or adjust the
slider bar.
Print a watermark a) Select a watermark from the Watermarks drop-down list.
b) To print the watermark on the first page only, click First page
only. Otherwise, the watermark is printed on each page.
Add or edit watermarks
NOTE: The printer driver must be stored on your computer
for this to work.
a) In the Watermarks area, click Edit. The Watermark
Details dialog box opens. b) Specify the settings for the
watermark, and then click OK.
Set document finishing options
To perform the following tasks, open the printer driver and click the Finishing tab.
How do I Steps to perform
Print on both sides (Duplex) Click Print on both sides. If you will bind the document along
the top edge, click Flip pages up.
Print a booklet a) Click Print on both sides. b) In the Booklet layout drop-
down list, click Left binding or Right binding. The Pages per
sheet option automatically changes to 2 pages per sheet.
Print multiple pages per sheet a) Select the number of pages per sheet from the Pages per
sheet drop-down list. b) Select the correct options for Print
page borders, Page order, and Orientation.
Select page orientation a) In the Orientation area, click Portrait or Landscape. b) To
print the page image upside down, click Rotate by 180
degrees.
Set product output options
To perform the following tasks, open the printer driver and click the Output tab.
NOTE: The options that are available on this tab depend on the finishing device that you are using.
How do I Steps to perform
Select staple options Select a stapling option from the Staple drop-down list.
Select an output bin Select an output bin from the Bin drop-down list.
Set job storage options
To perform the following tasks, open the printer driver and click the Job Storage tab.
142 Chapter 9 Print tasks ENWW