HP LeftHand P4000 SAN Solutions - Manual (Page 73)

Figure 49 Viewing the list of manager IP addresses
4. Click Communication Tasks, and select Update Communications List.
The list is updated with the current storage system in the management group and a list of IPs
with every manager’s enabled network interfaces.
A window opens which displays the manager IP addresses in the management group and a
reminder to reconfigure the application servers that are affected by the update.
Fibre Channel
If you are using Fibre Channel enabled storage systems in a management group, the Fibre Channel
tab appears in the Network category for those individual storage systems.
Verifying Fibre Channel port status
1. In the navigation window, select a Fibre Channel enabled storage system, and log in.
2. Open the tree, and select Network.
3. Click the Fibre Channel tab.
4. Verify the status of the ports.
Disabling Fibre Channel
1. In the navigation window, select a Fibre Channel enabled storage system, and log in.
2. Open the tree, and select Network.
3. Click the Fibre Channel tab.
4. Click Fibre Channel Tasks and select Disable Fibre Channel.
Fibre Channel 73