HP Photosmart D7460 Printer - Manual (Page 157)

If the memory card is not inserted properly, the HP Photosmart will not respond and
the Photo light (near the memory card slots) will not turn on.
After the memory card has been inserted properly, the Photo light will blink for a few
seconds, and then remain lit.
Card is not fully inserted
Cause: The card is not fully inserted.
Solution: Make sure you fully insert the memory card into the appropriate slot on
the HP Photosmart.
If the memory card is not inserted properly, the HP Photosmart will not respond and
the Photo light (near the memory card slots) will not turn on.
After the memory card has been inserted properly, the Photo light will blink for a few
seconds, and then remain lit.
Card is damaged
Cause: You formatted the card on a Windows XP computer. By default, Windows
XP will format a memory card of 8 MB or less and 64 MB or more with the FAT32
format. Digital cameras and other devices use the FAT (FAT16 or FAT12) format and
cannot recognize a FAT32 formatted card.
Solution: Reformat your memory card in your camera or format your memory card
in a Windows XP computer by selecting the FAT format.
Cause: The file system is corrupted.
Solution: Check the display for an error message telling you that the images on the
memory card are corrupted.
If the file system on the card is corrupt, reformat the memory card in your digital
camera.
CAUTION: Reformatting the memory card will delete any photos stored on the
card. If you have previously transferred the photos from your memory card to a
computer, try printing the photos from the computer. Otherwise, you will need to
retake any photos you might have lost.
Paper messages
The following is a list of paper-related error messages:
• Cannot load paper from input tray
• Ink is drying
• Out of paper
• Paper jam, misfeed or blocked carriage
Chapter 12
156 Troubleshooting
T
roub
les
hoot
ing