HP Photosmart D7460 Printer - Manual (Page 33)

c. When you have finished entering the new network name, touch Done, and then
touch OK.
TIP: If the HP Photosmart is unable to discover the network based on the
network name you entered, you will see the following prompts. You may want
to move the HP Photosmart closer to the computer and try running the
Wireless Setup Wizard again to automatically discover the network.
d. Touch Infrastructure.
e. Touch WEP encryption or WPA encryption.
If you do not want to use WEP encryption, touch No, my network does not use
encryption. Go to step 7.
6. If prompted, enter your WPA or WEP key as follows:
a. Touch the appropriate letters or numbers on the visual keyboard.
NOTE: You must enter the exact uppercase (capital) and lowercase (small)
letters. Otherwise, the wireless connection will fail.
b. When you are finished entering the WPA or WEP key, touch Done.
c. Touch OK to confirm.
The HP Photosmart will attempt to connect to the network. If a message says you
entered an invalid WPA or WEP key, check the key you wrote down for your new
network, follow the prompts to correct the key, and then try again.
7. When the HP Photosmart connects successfully to the network, install the software
on each computer that will use the device over the network.
To connect the HP Photosmart with SecureEasySetup
1. Activate SecureEasySetup on your wireless router or access point.
2. Touch Setup on the display.
3. Touch Network.
NOTE: If the menu option you want is not visible on the screen, touch or
to scroll through all the menu options.
4. Touch Wireless Setup Wizard.
5. Follow the onscreen prompts on the display to complete the connection.
6. When the HP Photosmart connects successfully to the network, go to your computer
to install the software on each computer that will use the network.
NOTE: If the connection fails, the wireless router or access point might have
timed out after you activated SecureEasySetup. Repeat the above task, ensuring
that you complete the steps on the control panel of the HP Photosmart
immediately after pressing the button on the wireless router or access point.
Related topics
“Install the software for a network connection” on page 36
Chapter 4
32 Finish setting up the HP Photosmart
Finish set
up