HP Photosmart D7460 Printer - Manual (Page 41)

3. Touch View Network Settings.
4. Do one of the following:
•
To display wired network settings, touch Display Wired Summary.
• To display wireless network settings, touch Display Wireless Summary.
• To print the network configuration page, touch Print Network Configuration
Page.
Related topics
“Network configuration page definitions” on page 44
Restore network defaults
You can reset the network settings to what they were when you purchased the
HP Photosmart.
CAUTION: This will erase all wireless setup information that you have entered. In
order to restore this information, you will need to run the Wireless Setup Wizard again.
To restore network defaults
1. Touch Setup on the display.
2. Touch Network.
NOTE: If the menu option you want is not visible on the screen, touch or
to scroll through all the menu options.
3. Touch Restore Network Defaults.
4. Touch Yes or No.
Turn the wireless radio on and off
The wireless radio is off by default. In order to stay connected to a wireless network, the
radio must stay on. When the radio is on, the blue light on the front of the HP Photosmart
is lit. However, if the HP Photosmart is connected to a wired network or you have a USB
connection, the radio is not used. In this case you might want to turn the radio off.
To turn the wireless radio on and off
1. Touch Setup on the display.
2. Touch Network.
NOTE: If the menu option you want is not visible on the screen, touch or
to scroll through all the menu options.
3. Touch Wireless Radio.
4. Touch On or Off.
Print the wireless network test
The wireless network test performs a series of diagnostic tests to determine whether
network setup is successful. The wireless network test prints automatically when the
Wireless Setup Wizard is run. You also can print the wireless network test at any time.
Chapter 4
40 Finish setting up the HP Photosmart
Finish set
up