Connect using ethernet, Connect using integrated wireless wlan 802.11, Find the device name and address – HP Photosmart D7460 Printer User Manual

Page 22

Advertising
background image

Description

Recommended number
of connected
computers for best
performance

Supported software
features

Setup instructions

Bluetooth-enabled
computer.

Wireless Technology”
on page 21

.

Printer sharing

Five.
The host computer must
be on at all times in order
to print from the other
computers.

All features resident on
the host computer are
supported. Only printing
is supported from the
other computers.

Follow the instructions in

“Use printer sharing”
on page 26

.

Connect using Ethernet

The HP Photosmart supports both 10 Mbps and 100 Mbps Ethernet network connections.
For detailed instructions on connecting the HP Photosmart to an Ethernet (wired) network,
see

“Wired network setup” on page 27

.

Connect using integrated wireless WLAN 802.11

The HP Photosmart uses an internal networking component that supports a wireless
network. For detailed instructions on connecting the HP Photosmart to a wireless (802.11)
network, see

“Integrated wireless WLAN 802.11 network setup” on page 29

.

Connect using the HP bt450, Printer and PC Adapter with Bluetooth

®

Wireless

Technology

HP bt450, Printer and PC Adapter with Bluetooth

®

Wireless Technology allows you to

print images from most Bluetooth devices, including computers. Simply insert the HP
bt450 into the front USB port and print from a Bluetooth device such as a PDA or camera
phone.
This section contains the following topics:

Find the device name and address

Set Bluetooth security for the HP Photosmart

Use a Bluetooth® connection to print from your computer

Find the device name and address

Some Bluetooth devices exchange device addresses when they communicate with each
other, so you might need to find out the device address of the HP Photosmart in order to
establish a connection. Also, some Bluetooth devices display the name of the printer
when connected. If you do not want the default name displayed as the name of the
HP Photosmart, you can change the device name.

To find out the device address of the HP Photosmart

1.

Insert the HP bt450 into the front USB port.

2.

Touch Setup on the display.

(continued)

Computer connection information

21

Finish

set

up

Advertising