Declaration of conformity (european economic area), Declaration of conformity – HP Photosmart D7460 Printer User Manual

Page 184

Advertising
background image

Declaration of conformity (European Economic Area)

The Declaration of Conformity in this document complies with ISO/IEC 17050-1 and EN 17050-1. It
identifies the product, manufacturer’s name and address, and applicable specifications recognized
in the European community.

HP Photosmart D7400 series declaration of conformity

DECLARATION OF CONFORMITY

according to ISO/IEC 17050-1 and EN 17050-1

Manufacturer's Name:

Hewlett-Packard Company

DoC#: SDGOB-0711-rel.1.0

Manufacturer's Address:

16399 West Bernardo Drive
San Diego, CA 92127, USA

declares, that the product

Product Name:

HP Photosmart D7400 Series (CC247A,B,C,D,E,F,G)

Regulatory Model:

4)

SDGOB-0711

Product Options:

ALL

Radio Module:

RSVLD-0608

Power Adapter:

0957-2230

conforms to the following Product Specifications:

SAFETY:

IEC 60950-1:2001 / EN60950-1:2001
IEC 60825-1 Ed. 1.2: 2001 / EN 60825-1 + A2 + A1: 2002 (LED)
GB4943: 2001

EMC:

CISPR 22:1997 +A1:2000 +A2:2002 / EN55022:1998 +A1:2000 +A2:2003 Class B

3)

CISPR 24:1997 +A1:2001 +A2:2002 / EN 55024:1998 +A1:2001 + A2:2003 Class B

3)

EN 301 489-1 V1.4.1: 2002
EN 301 489-17 V1.2.1: 2002
IEC 61000-3-2: 2000 + A1:2000 + A2:2005 / EN 61000-3-2: 2000 +A2:2005
IEC 61000-3-3:1994 +A1: 2001 / EN 61000-3-3:1995 +A1: 2001
FCC Title 47 CFR, Part 15 Class B / ICES-003, Issue 4
GB9254-1998, GB17625.1-2003

RADIO:

EN 300 328 V1.6.1:2004-11

HEALTH:

EU: 1999/519/EC

Supplementary Information:

1. The product herewith complies with the requirements of the EMC Directive 2004/108/EC, the Low Voltage

Directive 73/23/EEC and the R&TTE Directive 1999/5/EC and carries the CE-Marking accordingly

2. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation

3. The product was tested in a typical configuration.

4. For regulatory purposes, these products are assigned a Regulatory model number. This number should

not be confused with the product name or the product number(s).

San Diego, CA, USA
15 September, 2006

For Regulatory Topics only, contact:

European Contact:

Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh,

Department HQ-TRE / Standards Europe, Herrenberger

Strasse 140, D-71034 Böblingen, Germany (FAX: +49-7031-14-3143)

USA Contact:

Product Regulations Manager, Hewlett Packard Company, San Diego, (858) 655-4100

Declaration of conformity (European Economic Area)

183

Tec

hnical info

rmat

ion

Advertising