HP Photosmart D7460 Printer - Manual (Page 23)

3. Touch Bluetooth.
NOTE: If the menu option you want is not visible on the screen, touch or
to scroll through all the menu options.
4. Touch Device Address.
The Device Address is read only.
5. To enter the address into your device, follow the instructions that came with your
Bluetooth device.
6. Touch OK to exit the Setup menu.
To change the device name of the HP Photosmart
1. Touch Setup on the display.
2. Touch Bluetooth.
NOTE: If the menu option you want is not visible on the screen, touch or
to scroll through all the menu options.
3. Touch Device Name.
NOTE: The HP Photosmart ships with the predefined name of Photosmart
D7400.
4. Touch Change.
5. Use the visual keyboard to enter a new name.
6. When you have finished entering a name for the HP Photosmart, touch OK.
The name you entered will appear on your Bluetooth device when you connect to the
HP Photosmart to print.
7. Touch OK to exit the Setup menu.
Related topics
“Enter text using the visual keyboard” on page 13
Set Bluetooth security for the HP Photosmart
You can enable printer security settings through the Bluetooth menu on the
HP Photosmart. Touch Setup on the display, and then touch Bluetooth. From the
Bluetooth menu, you can:
• Require passkey authentication prior to someone printing to the HP Photosmart from
a Bluetooth device.
• Make the HP Photosmart visible or invisible to Bluetooth devices that are within range.
This section contains the following topics:
• Use a passkey to authenticate Bluetooth devices
• Set the HP Photosmart to be invisible to Bluetooth devices
• Turn the Bluetooth radio on and off
• Reset Bluetooth settings on the HP Photosmart
Chapter 4
22 Finish setting up the HP Photosmart
Finish set
up