HP Designjet 9000s Printer series - Manual (Page 112)

6. To change the option setting displayed, press the OK key.
7. Using the ▲ and ▼ keys, select a print mode that places less ink on the media.
Parameters:
● NORMAL (4-pass)
● H-QUALITY (8-pass)
● H-DENSITY (8-pass)
● H-QUALITY2
● H-DENSITY2
● FAST (4-pass)
● DRAFT (2-pass)
● FINE DRAFT
NOTE This value will only be applied by the printer front panel setting if the PRINT
MODE PREF option is set to FRONT PANEL.
NOTE Print modes on the printer front panel
8. Press the OK key to confirm the parameter.
Print the IQ print to check the image quality.
9. To change the print direction mode to unidirectional, select PRINT DIRECTION. in the MEDIA
REG menu with the ▲ and ▼ keys.
10. Select UNIDIR with the ▲ and ▼ keys for unidirectional printing.
11. Press the OK key to confirm the parameter.
If the image quality still does not improve, we recommend that you change the media. .
102 Chapter 7 How do I get the best image quality? ENWW
How do
I get
the best image
qualit
y?