HP Designjet 9000s Printer series - Manual (Page 50)

1. Take-up reel off
2. Internal (anti-clockwise) winding
3. External (clockwise) winding
NOTE For LOOSE winding mode, make sure that the media passes inside the take-up reel
sensor.
If the take-up reel is not used, turn the take-up reel switch off.
Make sure that you change the media roll on the take-up reel before the roll size exceeds the
diameter of the take-up reel media stop. Replace the core tube with a new one to avoid
winding errors.
1. Take-up reel sensor
40 Chapter 3 How do I load/unload media? ENWW
How
do
I load/unload
media?