HP Designjet 9000s Printer series - Manual (Page 177)

Parameters: none.
Heater F/W version display (HEATER FW VER)
This option displays the heater firmware version. If the heater cannot be recognized, "--.-" is displayed.
Parameters: none.
System date setting (SYSTEM DATE)
This option sets system date used in the unit in YY (year), MM (month), DD (day).
Parameters: 00/01/01 to 99/12/31.
System time setting (SYSTEM TIME)
This option sets the time for your printer.
Parameters: 00 : 00 to 23 : 59.
Factory default setting (FACTORY DEFAULT)
This option sets all parameter values to default factory settings.
Parameters: none.
USB address (USB ADDRESS)
This option displays the printer USB address.
Parameters:none.
ENWW The SETUP menu 167
Tell me about
f
ront
panel menus