HP Designjet 9000s Printer series - Manual (Page 46)

5. Ensure the ME (Media End) lever is in the forward position.
6. Feed the media until a beep sounds from the media feeder (about 200 mm).
NOTE If you have problems loading media, feed the media into the printer by holding
both edges of the media.
Take care that the media does not curl inside the rear cover and that the media edge
guards are not obstructing the media path. See How do I... Use the media edge guard.
36 Chapter 3 How do I load/unload media? ENWW
How
do
I load/unload
media?