The problem is… (checklist), The problem is… (troubleshoot ing t opics) – HP Designjet 9000s Printer series User Manual

Page 114

Advertising
background image

The problem is… (checklist)

Before deciding that there is a serious problem with the printer, check the following items.

Symptom

Items to be checked

Corrective measures

No power

Power cable connection

Check that the power cable is correctly
plugged into the power outlet.

Power supply to the outlet

Supply power to the power outlet.

Power switch on/off

Turn on the power switch. See How do
I.. Turn the power on/off.

The media guide is not heated even
when the heater is turned ON.

Printer status

The media guide is heated during
printing. Be sure the media guide is
heated by printing the test pattern.

Heater front panel

Turn on the heater (FRONT, PRINT, or
REAR) check that the media guide is
heated by printing the test pattern.

The printer fails to start or operate
correctly

ERROR LED and message on the front
panel

See The problem is.. An error message.

Cannot print

USB cable connection

Connect the USB cable correctly. See
How do I... Connect to a computer.

ERROR LED and message on the front
panel

See The problem is.. An error message

ERROR LED off

Print the nozzle adjustment pattern.
See How do I... Perform printhead
position adjustment

The data are not processed immediately

DATA LED (flashing?)

Check the communication to the
computer.

Poor print quality

Media type

Check for improvement by changing
the settings of the heater temperature,
print mode, RIP, etc. If there is no
improvement, check that the media is
supported. Replace the media with
another type.

Ink type

Use our recommended ink. See Tell me
about.. Ink cartridges

Ink head cleaning

Clean the head. See How do I maintain
the printer — Normal printhead recovery

Color stripe is not set.

Set the color stripe. See Color stripe
setting (COLOR STRIPE) in the MEDIA
REG. Menu.

Misdirected nozzles occurred in low
printing rate color.

Set the printhead mode to HIGHLIGHT.
See Printhead firing mode setting
(IMAGE GRADIENT) in the MEDIA
REG: Menu,

104

Chapter 8 The problem is… (troubleshooting topics)

ENWW

The problem

is…

(troubleshoot

ing
t

opics)

Advertising