HP Designjet 9000s Printer series - Manual (Page 64)

7. Input the nest origin point (print offset value for media width: origin point).
The nest origin setting is displayed.
The start position for printing is modified if either the media width or the nest origin is set.
A. Nest origin point
B. Print margin including the image
C. Media width input value
8. Select YES or NO.
● Select YES to increase the available area for printing. Rewind the media back onto the roll
ensuring the media is present between the media output sensor and media rollers. (The first
20 – 30 mm from the front edge will not be available for printing).
● Select NO if the area from the media output sensor position to the print start position (the
media rollers) will not be available for printing.
NOTE Ensure the media is aligned with the vertical guide line before loading.
54 Chapter 4 How do I... (printing topics) ENWW
How
do I... (
print
ing
topics)