HP Designjet 9000s Printer series - Manual (Page 52)

● Tension winding: place the take-up reel roller in the bottom position.
1. Tension roller
NOTE Do not change the order of the seven tension rollers as their outside diameters are
different. Changing the order will cause media skew. Distribute the tension rollers to support
the full width of the media.
1. Position each tension rollers by unscrewing the three screws to the left of the roller. Tighten the
screws when the roller is in its final position.
2. Press the ONLINE key to view the MEDIA REG menu.
3. Press ▼ to select MEDIA REG.
42 Chapter 3 How do I load/unload media? ENWW
How
do
I load/unload
media?