HP Designjet 9000s Printer series - Manual (Page 59)

3. Select the media with which you want to use or not use the media edge guards, and press the OK
key.
This setting will only apply to the selected media.
4. Scroll to USE EDGE GUARD using the ▲ or ▼ keys and press the OK key.
5. Select YES or NO and press OK to confirm.
Set the fan guard lever
NOTE Correct use of the fan guide lever will protect your printheads from exposure to the
suction fan that could cause them to dry. When loading media, ensure that the position of the
fan guard lever does not obstruct the media path.
1. Set the fan guard lever position according to the width of the media on which you are printing.
2. Align the arrow on the lever with the edge of the media.
NOTE To make sure that the fan guard lever does not come into contact with the media, that
can be caused by skew on long rolls, ensure a 5 mm gap between the arrow on the fan guard
lever and the edge of the media.
1. Fan guard lever arrow
2. Media edge guard
ENWW Set the fan guard lever 49
How do
I load/unload
media?