HP Designjet 9000s Printer series - Manual (Page 179)

15 Tell me about the heaters
This chapter describes temperature control, the heater front panel, parameter setup mode operations,
and error messages of the heater controller.
● The heaters
● Heater temperature settings
● Heater error messages
The heaters
The printer includes three heaters for fixing and stabilizing the printed image on the media. Each heater
is controlled separately.
1. Front heater (preheats the media)
2. Print heater (fixes the ink on to the media)
3. Rear heater (dries the ink and stabilizes the printed image)
ENWW The heaters 169
Tell me about
t
h
e heat
ers