HP Designjet 9000s Printer series - Manual (Page 53)

4. Press ▼ to display the TUR MODE option.
5. Select LOOSE or TENSION and press OK to confirm.
Load media on to the take-up reel
1. Prepare the core tube and 1 m of media. Attach one edge of the media to the tube using tape.
1. Tape
2. Core tube
3. Lead paper
4. Approximately 1 m
NOTE Make sure the lead paper is attached to the correct side of the tube. You may
wind the media over the roll for anti-clockwise winding, or under the roll for clockwise
winding.
Attach the paper to the core tube in a straight line so that media winding is even.
ENWW Use the take-up reel 43
How do
I load/unload
media?