HP Designjet 9000s Printer series - Manual (Page 157)

Manufacturing default media advance value (MFNG VAL)
This option displays the manufacturing default media advance value, which is factory set. This cannot
be modified by the user. Press OK to access the option to adjust the user-definable media advance
value.
Dry time value (DRY TIME VALUE)
Use this option to define the amount of time the printhead carriage pauses between printing passes for
the selected media type.
Parameters: three-digit time in seconds.
Print mode setting (PRINT MODE)
Use this option to set the default print quality for the selected media type.
NOTE This value will only be applied by the printer front panel setting if the PRINT MODE
PREF option is set to FRONT PANEL.
Parameters:
● NORMAL (4-pass)
● H-QUALITY (8-pass)
● H-DENSITY (8-pass)
● H-QUALITY2
● H-DENSITY2
● FAST (4-pass)
● DRAFT (2-pass)
● FINE DRAFT
Print direction setting (PRINT DIRECTION)
For the selected media type, use this option to set bidirectional printing so that the print carriage places
ink on the media at every pass, or unidirectional printing so that the print carriage places ink on the
media once every two passes.
ENWW The MEDIA REG menu 147
Tell me about
f
ront
panel menus