Reboot library, Reboot mgmt, Remove host – HP Command View for Tape Libraries Software User Manual
Page 197: Reboot library reboot mgmt remove host
reboot library
Description
Reboots the library. After executing this command, the CLI session is lost and
must be reestablished.
CAUTION:
To avoid loss of data, ensure that all backup jobs have completed
before executing this command.
Syntax
reboot library
[force]
Availability
All users and manual mode only
Operands
Specify force to skip the prompt asking if you are sure you want
to reboot the Interface Manager card. This operand is optional.
[force]
Examples
To reboot the library:
/>reboot library
To reboot the library, skipping the reboot prompt:
/>reboot library force
Rebooting the Interface Manager
See also
reboot mgmt
Description
Reboots the Interface Manager card. After entering this command, you are
prompted to input whether you are sure you want to reboot the Interface
Manager card.
CAUTION:
To avoid loss of data, ensure that all backup jobs have completed
before executing this command.
Syntax
reboot mgmt
[force]
Availability
All users and manual mode only
Operands
Specify force to skip the prompt asking if you are sure you want
to reboot the Interface Manager card. This operand is optional.
[force]
Examples
To reboot the Interface Manager card:
/>reboot mgmt
Caution: Rebooting the Interface Manager could take up to XX
seconds, and you will have to log on again to use the CLI.
Do you really want to reboot the Interface Manager (y/n)? y
Rebooting the Interface Manager
To reboot the Interface Manager card, skipping the reboot prompt:
/>reboot mgmt force
Rebooting the Interface Manager
See also
remove host
Description
Step-by-step wizard that guides you through the removal of a host node. The
wizard displays the hosts that are available for removal from the Interface
Manager. Only hosts that are not mapped appear.
Syntax
remove host
Availability
All users and modes
Operands
None
reboot library
197