HP Command View for Tape Libraries Software - Manual (Page 51)

Library TapeAssure views
Library TapeAssure offers three different tabular views.
•
Overview tabular view — displays information for all the libraries for which the Library
TapeAssure information is available in the CVTL MS database.
•
Partition tabular view — displays information for a selected library for which the Library
TapeAssure information is available in the CVTL MS database.
•
Usage tabular view — displays information for all the libraries for which the Library TapeAssure
information is available in the CVTL MS database.
NOTE: Library TapeAssure features are supported for the MSL G3, ESL G3, and MSL 6480
libraries only.
Overview tabular view
The Library TapeAssure Overview tabular view displays information for all the libraries for which
the Library TapeAssure information is available in the CVTL MS database.
To launch the Overview Tabular Data, go to TapeAssure
→Libraries→Overview and click on the
Overview node.
If there is no data, then a message is displayed stating:
Library Overview is not available or libraries are using an older
firmware. Please upgrade to an appropriate firmware for the tape
libraries.
Table 14 (page 51) shows the tool tips for the Overview tabular view dialog box.
Table 14 Overview tabular view tool tips for column headers
Tool Tip Column Header
The HP serial number of the library (for support use) Library SN
Description of the library Library Description
IP address IP Address
Hostname of the library Library Hostname
Firmware revision of the library Library Firmware Revision
Number of storage slots Storage Slots
Number of drives Library Drives
Number of mail slots Mail slots
Using TapeAssure 51