HP Color LaserJet CP3520 Printer Series - Manual (Page 113)

Configure a tray by using the Paper Handling menu
You can also configure the trays for type and size without a prompt from the product.
1. Press the Menu button .
2. Press the down arrow to highlight the PAPER HANDLING menu, and then press the OK button.
3. Press the down arrow to highlight the size or type setting for the desired tray, and then press the
OK button.
4. Press the up arrow or the down arrow to highlight the size or type. If you select a custom size,
select the unit of measure, and then set the X dimension and the Y dimension.
5. Press the OK button to save your selection.
6. Press the Menu button to exit the menus.
Automatic overhead transparency sensing (auto sense mode)
The automatic media type sensor functions only when that tray is configured to the ANY TYPE setting.
Configuring a tray to any other type, such as Bond or Glossy, deactivates the media sensor in that tray.
The HP Color LaserJet CP3525 Series printers can automatically classify paper types into one of two
categories:
● Non-transparency
● Transparency
For more control, a specific type must be selected in the job or configured in a tray.
Auto-sense settings
Full sensing (Tray 1 only)
● The product distinguishes between transparencies (Transparency mode) and paper (Normal
mode).
● Each time the product prints a page, it senses transparencies or non-transparencies.
● This is the slowest mode.
Transparency only
● The product distinguishes between transparencies (Transparency mode) and paper (Normal
mode).
● The product assumes that the second and all subsequent pages are of the same media type as
the first page.
● This is the fastest mode and is useful for high-volume printing in Normal mode.
For more information about setting these options, see Print Quality menu on page 24 .
ENWW Configure trays 101