HP Color LaserJet CP3520 Printer Series - Manual (Page 45)

Item Sub-item Values Description
The default depends on which
black print cartridge is installed. If
the standard-capacity black print
cartridge is installed, the default is
8%. If the high-capacity black print
cartridge is installed, the default is
7%.
COLOR SUPPLY OUT STOP*
AUTOCONTINUE BLACK
Sets the product behavior when a
color supply has reached its
estimated end of life.
When the product is set to STOP,
the REPLACE <COLOR>
CARTRIDGE or REPLACE
SUPPLIES message is displayed
when one or more color supplies
reach the out condition.
When the product is set to
AUTOCONTINUE BLACK, the
product continues printing with
black toner only.
JAM RECOVERY AUTO*
OFF
ON
Sets whether the product will
attempt to reprint pages after a
jam. If you select AUTO, the
product reprints pages if enough
memory is available for full-speed
two-sided printing.
RAM DISK AUTO*
OFF
Sets how the RAM disk feature is
configured. This is only available if
there is no hard disk installed and
the printer has at least 8 MB of
memory.
If the AUTO setting is enabled, the
product determines the optimal
RAM disk size based on the
amount of available memory.
If the OFF setting is enabled, the
RAM disk is disabled, but a
minimal RAM disk is still active.
LANGUAGE A listing of available languages
appears. Sets the default language. The
default language is ENGLISH.
ENWW Configure device menu 33