HP Color LaserJet CP3520 Printer Series - Manual (Page 37)

Item Sub-item Values Description
AUTO SENSE MODE TRAY 1 SENSING FULL SENSING
(default)
TRANSPARENCY
ONLY
Sets the sensing option for Tray 1 for paper types
using AUTO SENSE mode.
When FULL SENSING is selected, the product
senses every page and switches modes
accordingly. The product can distinguish
transparencies from other paper types.
When TRANSPARENCY ONLY is selected, the
product senses only the first page. The product
can distinguish transparencies from other paper
types.
PRINT MODES A list of paper types displays. A list of print modes
displays. Configure the print mode that is associated with
each media type.
RESTORE MODES Use this feature to return all paper type-mode
settings to the factory-default settings.
OPTIMIZE A list of available options
displays. Allows you to optimize various print modes to
address print quality issues.
RESTORE OPTIMIZE Use this feature to return all the settings in the
OPTIMIZE menu to the factory-default values.
QUICK CALIBRATE
NOW Performs a partial product calibration.
FULL CALIBRATE NOW Performs all product calibrations.
DELAY CALIBRATION
AT WAKE/POWER-ON NO
YES*
This menu controls the timing of the calibration
when the product wakes up or is turned on.
● Select NO to have the product calibrate
immediately when it wakes up or is turned on.
The product will not print any jobs until it
finishes calibrating.
● Select YES to enable a product that is asleep
to accept print jobs before it calibrates. It may
start calibrating before it has printed all the
jobs it has received. This option allows
quicker printing when coming out of sleep
mode or when you turn the product on, but
print quality might be reduced.
NOTE: For best results, allow the product to
calibrate before printing. Print jobs performed
before calibration might not be of the highest
quality.
RESOLUTION Image REt 3600*
1200x600 dpi
Sets the resolution at which the product prints. The
default value is Image REt 3600. Try the
1200x600 dpi setting to improve printing for
detailed line work or small text.
EDGE CONTROL OFF
LIGHT
NORMAL*
MAXIMUM
The Edge Control setting determines how edges
are rendered. Edge control has two components:
adaptive halftoning and trapping. Adaptive
halftoning increases edge sharpness. Trapping
ENWW Configure device menu 25